fix: syntax error

notebooks/official/custom/SDK_FBProphet_Forecasting_Online.ipynb

@@ -129,51 +129,6 @@
         "to generate a cost estimate based on your projected usage."
       ]
     },
-    {
-      "cell_type": "markdown",
-      "metadata": {
-        "id": "ze4-nDLfK4pw"
-      },
-      "source": [
-        "### Set up your local development environment\n",
-        "\n",
-        "**If you are using Colab or Vertex AI Workbench Notebooks**, your environment already meets\n",
-        "all the requirements to run this notebook. You can skip this step.\n",
-        "\n",
-        "**If you are using Colab**, docker related steps are skipped as Colab doesn't fully support docker yet. \n",
-        "\n",
-        "**Otherwise**, make sure your environment meets this notebook's requirements.\n",
-        "You need the following:\n",
-        "\n",
-        "* Docker\n",
-        "* Git\n",
-        "* Google Cloud SDK (gcloud)\n",
-        "* Python 3\n",
-        "* virtualenv\n",
-        "* Jupyter notebook running in a virtual environment with Python 3\n",
-        "\n",
-        "The Google Cloud guide to [Setting up a Python development\n",
-        "environment](https://cloud.google.com/python/setup) and the [Jupyter\n",
-        "installation guide](https://jupyter.org/install) provide detailed instructions\n",
-        "for meeting these requirements. The following steps provide a condensed set of\n",
-        "instructions:\n",
-        "\n",
-        "1. [Install and initialize the Cloud SDK.](https://cloud.google.com/sdk/docs/)\n",
-        "\n",
-        "1. [Install Python 3.](https://cloud.google.com/python/setup#installing_python)\n",
-        "\n",
-        "1. [Install\n",
-        "   virtualenv](https://cloud.google.com/python/setup#installing_and_using_virtualenv)\n",
-        "   and create a virtual environment that uses Python 3. Activate the virtual environment.\n",
-        "\n",
-        "1. To install Jupyter, run `pip3 install jupyter` on the\n",
-        "command-line in a terminal shell.\n",
-        "\n",
-        "1. To launch Jupyter, run `jupyter notebook` on the command-line in a terminal shell.\n",
-        "\n",
-        "1. Open this notebook in the Jupyter Notebook Dashboard."
-      ]
-    },
     {
       "cell_type": "markdown",
       "metadata": {
@@ -204,7 +159,7 @@
         "pyarrow==8.0.0\n",
         "fastapi~=0.63\n",
         "pystan\n",
-        "prophet==1.1"
+        "prophet==1.1.4"
       ]
     },
     {
@@ -215,313 +170,170 @@
       },
       "outputs": [],
       "source": [
-        "import os\n",
-        "\n",
-        "# The Vertex AI Workbench Notebook product has specific requirements\n",
-        "IS_WORKBENCH_NOTEBOOK = os.getenv(\"DL_ANACONDA_HOME\")\n",
-        "IS_USER_MANAGED_WORKBENCH_NOTEBOOK = os.path.exists(\n",
-        "    \"/opt/deeplearning/metadata/env_version\"\n",
-        ")\n",
-        "\n",
-        "# Vertex AI Notebook requires dependencies to be installed with '--user'\n",
-        "USER_FLAG = \"\"\n",
-        "if IS_WORKBENCH_NOTEBOOK:\n",
-        "    USER_FLAG = \"--user\"\n",
-        "\n",
         "# install dependencies from requirements.txt\n",
-        "! pip3 install {USER_FLAG} -r requirements.txt -q"
+        "! pip3 install -r requirements.txt -q"
       ]
     },
     {
       "cell_type": "markdown",
       "metadata": {
-        "id": "hhq5zEbGg0XX"
+        "id": "restart"
       },
       "source": [
-        "### Restart the kernel\n",
-        "\n",
-        "After you install the additional packages, you need to restart the notebook kernel so it can find the packages."
+        "### Colab only: Uncomment the following cell to restart the kernel"
       ]
     },
     {
       "cell_type": "code",
       "execution_count": null,
       "metadata": {
-        "id": "EzrelQZ22IZj"
+        "id": "D-ZBOjErv5mM"
       },
       "outputs": [],
       "source": [
-        "# Automatically restart kernel after installs\n",
-        "import os\n",
+        "# Automatically restart kernel after installs so that your environment can access the new packages\n",
+        "# import IPython\n",
         "\n",
-        "if not os.getenv(\"IS_TESTING\"):\n",
-        "    # Automatically restart kernel after installs\n",
-        "    import IPython\n",
-        "\n",
-        "    app = IPython.Application.instance()\n",
-        "    app.kernel.do_shutdown(True)"
+        "# app = IPython.Application.instance()\n",
+        "# app.kernel.do_shutdown(True)"
       ]
     },
     {
       "cell_type": "markdown",
       "metadata": {
-        "id": "lWEdiXsJg0XY"
+        "id": "yfEglUHQk9S3"
       },
       "source": [
-        "## Before you begin"
-      ]
-    },
-    {
-      "cell_type": "markdown",
-      "metadata": {
-        "id": "BF1j6f9HApxa"
-      },
-      "source": [
-        "### Set up your Google Cloud project\n",
+        "## Before you begin\n",
         "\n",
-        "**The following steps are required, regardless of your notebook environment.**\n",
+        "### Set your project ID\n",
         "\n",
-        "1. [Select or create a Google Cloud project](https://console.cloud.google.com/cloud-resource-manager). When you first create an account, you get a $300 free credit towards your compute/storage costs.\n",
-        "\n",
-        "1. [Make sure that billing is enabled for your project](https://cloud.google.com/billing/docs/how-to/modify-project).\n",
-        "\n",
-        "1. [Enable the APIs for Vertex AI, Compute Engine and Artifact Registry](https://console.cloud.google.com/flows/enableapi?apiid=aiplatform.googleapis.com,compute.googleapis.com,artifactregistry.googleapis.com).\n",
-        "\n",
-        "1. If you are running this notebook locally, you need to install the [Cloud SDK](https://cloud.google.com/sdk).\n",
-        "\n",
-        "1. Enter your project ID in the cell below. Then run the cell to make sure the\n",
-        "Cloud SDK uses the right project for all the commands in this notebook.\n",
-        "\n",
-        "**Note**: Jupyter runs lines prefixed with `!` as shell commands, and it interpolates Python variables prefixed with `$` into these commands."
-      ]
-    },
-    {
-      "cell_type": "markdown",
-      "metadata": {
-        "id": "WReHDGG5g0XY"
-      },
-      "source": [
-        "#### Set your project ID\n",
-        "\n",
-        "**If you don't know your project ID**, you may be able to get your project ID using `gcloud`."
+        "**If you don't know your project ID**, try the following:\n",
+        "* Run `gcloud config list`.\n",
+        "* Run `gcloud projects list`.\n",
+        "* See the support page: [Locate the project ID](https://support.google.com/googleapi/answer/7014113)"
       ]
     },
     {
       "cell_type": "code",
       "execution_count": null,
       "metadata": {
-        "id": "oM1iC_MfAts1"
+        "id": "set_project_id"
       },
       "outputs": [],
       "source": [
-        "PROJECT_ID = \"[your-project-id]\"  # @param {type:\"string\"}"
-      ]
-    },
-    {
-      "cell_type": "code",
-      "execution_count": null,
-      "metadata": {
-        "id": "4dbb3cd4c564"
-      },
-      "outputs": [],
-      "source": [
-        "if PROJECT_ID == \"\" or PROJECT_ID is None or PROJECT_ID == \"[your-project-id]\":\n",
-        "    # Get your GCP project id from gcloud\n",
-        "    shell_output = ! gcloud config list --format 'value(core.project)' 2>/dev/null\n",
-        "    PROJECT_ID = shell_output[0]\n",
-        "    print(\"Project ID:\", PROJECT_ID)"
-      ]
-    },
-    {
-      "cell_type": "code",
-      "execution_count": null,
-      "metadata": {
-        "id": "563c444fb946"
-      },
-      "outputs": [],
-      "source": [
-        "! gcloud config set project $PROJECT_ID"
+        "PROJECT_ID = \"[your-project-id]\"  # @param {type:\"string\"}\n",
+        "\n",
+        "# Set the project id\n",
+        "! gcloud config set project {PROJECT_ID}"
       ]
     },
     {
       "cell_type": "markdown",
       "metadata": {
-        "id": "233cd87467c7"
+        "id": "region"
       },
       "source": [
         "#### Region\n",
         "\n",
-        "You can also change the `REGION` variable, which is used for operations\n",
-        "throughout the rest of this notebook.  Below are regions supported for Vertex AI. We recommend that you choose the region closest to you.\n",
-        "\n",
-        "- Americas: `us-central1`\n",
-        "- Europe: `europe-west4`\n",
-        "- Asia Pacific: `asia-east1`\n",
-        "\n",
-        "You may not use a multi-regional bucket for training with Vertex AI. Not all regions provide support for all Vertex AI services.\n",
-        "\n",
-        "Learn more about [Vertex AI regions](https://cloud.google.com/vertex-ai/docs/general/locations)"
+        "You can also change the `REGION` variable used by Vertex AI. Learn more about [Vertex AI regions](https://cloud.google.com/vertex-ai/docs/general/locations)."
       ]
     },
     {
       "cell_type": "code",
       "execution_count": null,
       "metadata": {
-        "id": "eb356bd4d5e9"
+        "id": "region"
       },
       "outputs": [],
       "source": [
-        "REGION = \"[your-region]\"  # @param {type: \"string\"}\n",
-        "\n",
-        "if REGION == \"[your-region]\":\n",
-        "    REGION = \"us-central1\""
+        "REGION = \"us-central1\"  # @param {type: \"string\"}"
       ]
     },
     {
       "cell_type": "markdown",
       "metadata": {
-        "id": "2a598c7e52fb"
-      },
-      "source": [
-        "#### UUID\n",
-        "\n",
-        "If you are in a live tutorial session, you might be using a shared test account or project. To avoid name collisions between users on resources created, you create a uuid for each instance session, and append it onto the name of resources you create in this tutorial."
-      ]
-    },
-    {
-      "cell_type": "code",
-      "execution_count": null,
-      "metadata": {
-        "id": "1aec5e7288ab"
-      },
-      "outputs": [],
-      "source": [
-        "import random\n",
-        "import string\n",
-        "\n",
-        "\n",
-        "# Generate a uuid of a specifed length(default=8)\n",
-        "def generate_uuid(length: int = 8) -> str:\n",
-        "    return \"\".join(random.choices(string.ascii_lowercase + string.digits, k=length))\n",
-        "\n",
-        "\n",
-        "UUID = generate_uuid()"
-      ]
-    },
-    {
-      "cell_type": "markdown",
-      "metadata": {
-        "id": "dr--iN2kAylZ"
+        "id": "gcp_authenticate"
       },
       "source": [
         "### Authenticate your Google Cloud account\n",
         "\n",
-        "**If you are using Vertex AI Workbench notebooks**, your environment is already\n",
-        "authenticated.\n",
+        "Depending on your Jupyter environment, you may have to manually authenticate. Follow the relevant instructions below.\n",
         "\n",
-        "**If you are using Colab**, run the cell below and follow the instructions\n",
-        "when prompted to authenticate your account via oAuth.\n",
+        "**1. Vertex AI Workbench**\n",
+        "* Do nothing as you are already authenticated.\n",
         "\n",
-        "**Otherwise**, follow these steps:\n",
-        "\n",
-        "1. In the Cloud Console, go to the [**Create service account key**\n",
-        "   page](https://console.cloud.google.com/apis/credentials/serviceaccountkey).\n",
-        "\n",
-        "2. Click **Create service account**.\n",
-        "\n",
-        "3. In the **Service account name** field, enter a name, and\n",
-        "   click **Create**.\n",
-        "\n",
-        "4. In the **Grant this service account access to project** section, click the **Role** drop-down list. Type \"Vertex AI\"\n",
-        "into the filter box, and select\n",
-        "   **Vertex AI Administrator**. Type \"Storage Object Admin\" into the filter box, and select **Storage Object Admin**.\n",
-        "\n",
-        "5. Click *Create*. A JSON file that contains your key downloads to your\n",
-        "local environment.\n",
-        "\n",
-        "6. Enter the path to your service account key as the\n",
-        "`GOOGLE_APPLICATION_CREDENTIALS` variable in the cell below and run the cell."
+        "**2. Local JupyterLab instance, uncomment and run:**"
       ]
     },
     {
       "cell_type": "code",
       "execution_count": null,
       "metadata": {
-        "id": "PyQmSRbKA8r-"
+        "id": "ce6043da7b33"
       },
       "outputs": [],
       "source": [
-        "# If you are running this notebook in Colab, run this cell and follow the\n",
-        "# instructions to authenticate your GCP account. This provides access to your\n",
-        "# Cloud Storage bucket and lets you submit training jobs and prediction\n",
-        "# requests.\n",
-        "\n",
-        "import os\n",
-        "import sys\n",
-        "\n",
-        "# If on Vertex AI Workbench, then don't execute this code\n",
-        "IS_COLAB = \"google.colab\" in sys.modules\n",
-        "if not os.path.exists(\"/opt/deeplearning/metadata/env_version\") and not os.getenv(\n",
-        "    \"DL_ANACONDA_HOME\"\n",
-        "):\n",
-        "    if \"google.colab\" in sys.modules:\n",
-        "        from google.colab import auth as google_auth\n",
-        "\n",
-        "        google_auth.authenticate_user()\n",
-        "\n",
-        "    # If you are running this notebook locally, replace the string below with the\n",
-        "    # path to your service account key and run this cell to authenticate your GCP\n",
-        "    # account.\n",
-        "    elif not os.getenv(\"IS_TESTING\"):\n",
-        "        %env GOOGLE_APPLICATION_CREDENTIALS '[your-service-account-key-path]'"
+        "# ! gcloud auth login"
       ]
     },
     {
       "cell_type": "markdown",
       "metadata": {
-        "id": "62f861b68b50"
+        "id": "0367eac06a10"
+      },
+      "source": [
+        "**3. Colab, uncomment and run:**"
+      ]
+    },
+    {
+      "cell_type": "code",
+      "execution_count": null,
+      "metadata": {
+        "id": "21ad4dbb4a61"
+      },
+      "outputs": [],
+      "source": [
+        "# from google.colab import auth\n",
+        "# auth.authenticate_user()"
+      ]
+    },
+    {
+      "cell_type": "markdown",
+      "metadata": {
+        "id": "c13224697bfb"
+      },
+      "source": [
+        "**4. Service account or other**\n",
+        "* See how to grant Cloud Storage permissions to your service account at https://cloud.google.com/storage/docs/gsutil/commands/iam#ch-examples."
+      ]
+    },
+    {
+      "cell_type": "markdown",
+      "metadata": {
+        "id": "bucket:mbsdk"
       },
       "source": [
         "### Create a Cloud Storage bucket\n",
         "\n",
-        "**The following steps are required, regardless of your notebook environment.**\n",
-        "\n",
-        "To update your model artifacts without re-building the container, you upload your model\n",
-        "artifacts and any custom code to a Cloud Storage bucket. You also provide a Cloud Storage bucket to serve as a default staging location for your Vertex AI SDK.\n",
-        "\n",
-        "Set the name of your Cloud Storage bucket below. It must be unique across all\n",
-        "Cloud Storage buckets. "
+        "Create a storage bucket to store intermediate artifacts such as datasets."
       ]
     },
     {
       "cell_type": "code",
       "execution_count": null,
       "metadata": {
-        "id": "2232344edb11"
+        "id": "bucket"
       },
       "outputs": [],
       "source": [
-        "BUCKET_NAME = \"[your-bucket-name]\"  # @param {type:\"string\"}\n",
-        "BUCKET_URI = f\"gs://{BUCKET_NAME}\""
-      ]
-    },
-    {
-      "cell_type": "code",
-      "execution_count": null,
-      "metadata": {
-        "id": "6749c55b3f6f"
-      },
-      "outputs": [],
-      "source": [
-        "if BUCKET_NAME == \"\" or BUCKET_NAME is None or BUCKET_NAME == \"[your-bucket-name]\":\n",
-        "    BUCKET_NAME = PROJECT_ID + \"aip-\" + UUID\n",
-        "    BUCKET_URI = f\"gs://{BUCKET_NAME}\""
+        "BUCKET_URI = f\"gs://your-bucket-name-{PROJECT_ID}-unique\"  # @param {type:\"string\"}"
       ]
     },
     {
       "cell_type": "markdown",
       "metadata": {
-        "id": "58cb4f5895f0"
+        "id": "create_bucket"
       },
       "source": [
         "**Only if your bucket doesn't already exist**: Run the following cell to create your Cloud Storage bucket."
@@ -531,31 +343,11 @@
       "cell_type": "code",
       "execution_count": null,
       "metadata": {
-        "id": "2d2208676cee"
+        "id": "create_bucket"
       },
       "outputs": [],
       "source": [
-        "! gsutil mb -l $REGION $BUCKET_URI"
-      ]
-    },
-    {
-      "cell_type": "markdown",
-      "metadata": {
-        "id": "c664a5abc11a"
-      },
-      "source": [
-        "Finally, validate access to your Cloud Storage bucket by examining its contents:"
-      ]
-    },
-    {
-      "cell_type": "code",
-      "execution_count": null,
-      "metadata": {
-        "id": "2c1b1c29f5f6"
-      },
-      "outputs": [],
-      "source": [
-        "! gsutil ls -al $BUCKET_URI"
+        "! gsutil mb -l {REGION} {BUCKET_URI}"
       ]
     },
     {
@@ -1318,10 +1110,14 @@
       },
       "outputs": [],
       "source": [
+        "import sys\n",
+        "\n",
+        "\n",
         "def build_image():\n",
         "    ! sudo docker build --tag=\"{REGION}-docker.pkg.dev/{PROJECT_ID}/{REPOSITORY}/{IMAGE}\" . > logs.txt\n",
         "\n",
         "\n",
+        "IS_COLAB = \"google.colab\" in sys.modules\n",
         "if not IS_COLAB and not os.getenv(\"IS_TESTING\"):\n",
         "    print(\"Building the image...\")\n",
         "    build_image()\n",
@@ -1469,26 +1265,55 @@
     {
       "cell_type": "markdown",
       "metadata": {
-        "id": "212b2935ea12"
+        "id": "2d242773d707"
       },
       "source": [
-        "### Push the container to artifact registry\n",
+        "#### Enable Artifact Registry API\n",
+        "You must enable the Artifact Registry API service for your project.\n",
         "\n",
-        "Create your repository in the Artifact registry and push your container image to the repository.\n",
-        "Run this below cell once to create the artifact repository."
+        "<a href=\"https://cloud.google.com/artifact-registry/docs/enable-service\">Learn more about Enabling service</a>."
       ]
     },
     {
       "cell_type": "code",
       "execution_count": null,
       "metadata": {
-        "id": "8b2c683d1e2d"
+        "id": "9d72f89cabd5"
       },
       "outputs": [],
       "source": [
-        "!gcloud artifacts repositories create {REPOSITORY} \\\n",
-        " --repository-format=docker \\\n",
-        " --location=$REGION"
+        "! gcloud services enable artifactregistry.googleapis.com\n",
+        "\n",
+        "if os.getenv(\"IS_TESTING\"):\n",
+        "    ! sudo apt-get update --yes && sudo apt-get --only-upgrade --yes install google-cloud-sdk-cloud-run-proxy google-cloud-sdk-harbourbridge google-cloud-sdk-cbt google-cloud-sdk-gke-gcloud-auth-plugin google-cloud-sdk-kpt google-cloud-sdk-local-extract google-cloud-sdk-minikube google-cloud-sdk-app-engine-java google-cloud-sdk-app-engine-go google-cloud-sdk-app-engine-python google-cloud-sdk-spanner-emulator google-cloud-sdk-bigtable-emulator google-cloud-sdk-nomos google-cloud-sdk-package-go-module google-cloud-sdk-firestore-emulator kubectl google-cloud-sdk-datastore-emulator google-cloud-sdk-app-engine-python-extras google-cloud-sdk-cloud-build-local google-cloud-sdk-kubectl-oidc google-cloud-sdk-anthos-auth google-cloud-sdk-app-engine-grpc google-cloud-sdk-pubsub-emulator google-cloud-sdk-datalab google-cloud-sdk-skaffold google-cloud-sdk google-cloud-sdk-terraform-tools google-cloud-sdk-config-connector\n",
+        "    ! gcloud components update --quiet"
+      ]
+    },
+    {
+      "cell_type": "markdown",
+      "metadata": {
+        "id": "23f3ba8346f4"
+      },
+      "source": [
+        "### Create a private Docker repository\n",
+        "Your first step is to create your own Docker repository in Google Artifact Registry.\n",
+        "\n",
+        "1 - Run the gcloud artifacts repositories create command to create a new Docker repository with your region with the description \"docker repository\".\n",
+        "\n",
+        "2 - Run the gcloud artifacts repositories list command to verify that your repository was created."
+      ]
+    },
+    {
+      "cell_type": "code",
+      "execution_count": null,
+      "metadata": {
+        "id": "64fee26c2dff"
+      },
+      "outputs": [],
+      "source": [
+        "! gcloud artifacts repositories create {REPOSITORY} --repository-format=docker --location={REGION} --description=\"Docker repository\"\n",
+        "\n",
+        "! gcloud artifacts repositories list"
       ]
     },
     {